CAPACITY OF THE INTERSTAND COOLING UNIT IN HOT ROLLING PROCESS

Authors

  • Vladimir L. Brovkin
  • Vladislav A. Kachal
  • Tatiana V. Doroshenko
  • Ladislav Lazic
  • Augustin Varga
  • Jan Kizek
  • Svetlana V. Brovkina

DOI:

https://doi.org/10.12776/ams.v20i4.388

Keywords:

hot rolling, accelerated cooling, finite difference modelling

Abstract

The aim of the paper was to improve the economy of rolling mill production and to extend the control range of cooling capacity of the accelerated cooling unit by choosing the optimal dimensions of the cooling chamber. The object of research was the interstand cooling unite for accelerated cooling of the hot-rolled products of round section in the line of continuous rolling mill in order to reduce the machine time rolling or even eliminate completely the requirement for heat treatment of the hot-rolled products in heat-treatment furnaces. The influence of the design parameters of the cooling chamber on the expanding the control range, retaining a high cooling capacity of the chamber, was investigated by the numerical model based on the finite difference method. The diagrams presented in the paper allow determining the diameters of the cooling chamber, which provide a wide control range of the chamber cooling capacity and minimization of energy consumption of the electric water pump.

Downloads

Published

2014-12-31

How to Cite

Brovkin, V. L., Kachal, V. A. ., Doroshenko, T. V. ., Lazic, L. ., Varga, A. ., Kizek, J. ., & Brovkina, S. V. . (2014). CAPACITY OF THE INTERSTAND COOLING UNIT IN HOT ROLLING PROCESS. Acta Metallurgica Slovaca, 20(4), 381–388. https://doi.org/10.12776/ams.v20i4.388

Most read articles by the same author(s)