THEORETICAL AND EXPERIMENTAL MODELING OF THE PROCESS OF MELTING COMPLEX ALLOYED STEELS (Fe-Si-Al-Mn)

Authors

  • Bauyrzhan Kelamanov Zhubanov University
  • Yerbol Kyatbay
  • Gaukhar Yerekeyeva Karaganda Industrial University, Department of Metallurgy and Materials Science, Republic Street No 30. 101400, Temirtau
  • Tair Tushyev Karaganda Industrial University, Department of Metallurgy and Materials Science, Republic Street No 30. 101400, Temirtau

DOI:

https://doi.org/10.36547/ams.30.2.2014

Keywords:

Melting Complex Alloyed Steels, thermodynamic diagram, Gibbs energy, phases, mathematical model

Abstract

In the practice of complex theoretical research of multicomponent systems, the so-called thermodynamic-diagram method of analysis is known, which significantly simplifies the study of phase transformations in multicomponent systems by dividing them into thermodynamically stable elementary partial subsystems of equal dimensionality as the main ones. Thermodynamic-diagram analysis combines the thermodynamic assessment of chemical interactions between components in the studied system with a geometric diagram. Such a combination, as studies of the physicochemical principles of refractories and ferroalloys production have shown, proves to be productive in interpreting chemical interactions in complex systems.

Downloads

Published

2024-06-18

How to Cite

Kelamanov, B., Kyatbay , Y., Yerekeyeva , G., & Tushyev, T. (2024). THEORETICAL AND EXPERIMENTAL MODELING OF THE PROCESS OF MELTING COMPLEX ALLOYED STEELS (Fe-Si-Al-Mn). Acta Metallurgica Slovaca, 30(2), 51–56. https://doi.org/10.36547/ams.30.2.2014

Most read articles by the same author(s)