Behavior of metallic trace elements containing in stabilized and solidified oily petroleum sludge

Authors

  • Dihia Bellache
  • Karim Moussaceb
  • Emmanuel Jousseinn
  • Jean-Claude Bollinger
  • Loubna Chaabane

DOI:

https://doi.org/10.2478/nbec-2019-0018

Keywords:

Leaching tests, Portland cement, Stabilization/solidification, Waste

Abstract

The present work examines the influence of the leaching conditions on the release of various chemical elements from a cementitious material obtained by solidification of an industrial waste rejection of Algeria. Toxicity Characteristic Leaching Procedure (TCLP), X-ray diffraction (XRD) and Scanning electron microscopy coupled with energy dispersive X-ray microanalysis SEM-EDX analyses were employed to characterize the waste and the stabilized/solidified materials. Than several formulations were prepared with different percent of waste ranging from 0 % to 30 %. To evaluate the influence of leaching conditions on the release of chemical ions (Zn2+, Pb2+, Cl-, Mg2+, Ca2+, Na+, K+ and SO4 2−) contained in the stabilized and solidified materials, the Acid Neutralization Capacity (ANC), the Pore Water (PW) and Monolith Leaching Tests (MLT) have been carried out. The leaching tests (ANC, PW and MLT) have shown a low metal leachability. However, the lowest released amount was observed for the MLT.

Downloads

Published

2019-12-26

How to Cite

Bellache, D. ., Moussaceb, . K. ., Jousseinn, E. ., Bollinger, J.-C. ., & Chaabane, L. . (2019). Behavior of metallic trace elements containing in stabilized and solidified oily petroleum sludge. Nova Biotechnologica Et Chimica, 18(2), 154–165. https://doi.org/10.2478/nbec-2019-0018

Issue

Section

Research Articles