SOME TRIBOLOGICAL ASPECTS OF Fe-Zn COATED STEEL SHEETS AT STAMPING PROCESSES

Authors

  • Emil Evin
  • Miroslav Tomáš
  • Mária Kollárová
  • Bogdan Antoszewski

DOI:

https://doi.org/10.12776/ams.v20i2.298

Keywords:

Fe-Zn coatings, steel sheets, coating morphology, friction coefficient, numerical simulation

Abstract

Contribution presents results of study of tribological characteristics of Fe-Zn coated steel sheets. Experimental research was done using coatings with different alloying – under alloyed, optimal and slightly pre alloyed. The optimally alloyed coatings and the slightly prealloyed ones were annealed in order to reach different alloying level. Alloying level was evaluated by phase composition and % Fe in coating. Tribological properties such as surface microgeometry, abrasion, friction coefficient were analysed from the view of formability. Experimental results of strip drawn test were used for verification of strip-drawn test numerical simulation. Based on numerical simulation results, contact pressure on drawing die radius was observed.

Downloads

Published

2014-06-30

How to Cite

Evin, E. ., Tomáš, M. ., Kollárová, M. ., & Antoszewski, B. . (2014). SOME TRIBOLOGICAL ASPECTS OF Fe-Zn COATED STEEL SHEETS AT STAMPING PROCESSES. Acta Metallurgica Slovaca, 20(2), 189–199. https://doi.org/10.12776/ams.v20i2.298

Most read articles by the same author(s)